 |
ISOJOINT
METER SERVICE FITTING
The
Replacement Solution for Insulation Unions that have High
Failure Rates.
- Does
not require maintenance for lifetime of 20 years
- Easy,
accurate, and safe installation
- Can
be threaded into line, welded without leakage or damage
to internal insulators
- No
worry of ill fitting parts
- Internally
lined and externally coated with Nitrocellulose Enamel
- Integral
part of the joint with electrical and dielectrical characteristics
and strong resistance to chemical agents
-
High tensile with traction and bending
- Suitable
for above ground work up to 10 BAR=150 PSI with constant
operating pressure
- Guaranteed
sealing if pressure raised beyond maximum operating level;
hydraulically tested at 15 BAR=220 PSI
- Two
internal seal bushings
- Not
consumable, can be re-used
|
Meter
Service Fittings are manufactured in accordance with the highest
technical standards which guarantee:
-
Mechanical requirements are met for the specific needs of a plant
– Full technical details should be supplied.
-
Insulating requirements are met and surpassed in regard to the
electrical characteristics of the product carried in the pipeline
When
ordering, please give the following information:
- Diameter of pipe
- Style, Male/Male etc...
Now
available from APS, Copper and Steel Water Service Fittings Available:
- M
x M NPT Thread
- M
x F NPT Thread
- MNPT
x Weld
- FNPT
x Weld
- Weld
x Weld
- F
x F NPT
U.S.
Patented
Under license from Nuova Guingas
Formigine (Modena), Italy
|
